Skip to content Skip to sidebar Skip to footer

6 Easy And Cheap Ways To Remove Rust On Exhausts

6 Easy And Cheap Ways To Remove Rust On Exhausts

For motorcycle owners, we are often faced with the problem of a rusty exhaust. Well, a rusty exhaust not only makes it look ugly, but also affects its performance. For that, like it or not, you have to take care of it in various ways to remove rust on the exhaust.

Rusted exhaust is generally caused by components that experience rapid temperature changes. This rusty exhaust part is usually located on the exhaust neck. To remove the rusty exhaust part, you can follow the following ways.

1. Utilizing Used Oil

One way to remove rust on the exhaust is to give it used oil. So, when you change motor oil, don't throw away the used oil. You can use the used oil to remove the rust attached to the exhaust neck.

How to remove rust on the exhaust with used oil is fairly easy and doesn't cost a lot. In fact, you do not need to remove the exhaust during the cleaning process. You only need to start the motor first until it is hot. Then, apply used oil on the rusty area.

2. Using Grease

Grease oil or commonly referred to as a stamp can also be one way to remove rust on the motor. The use of this method is also fairly easy, not much different from how to remove rust using used oil.

First of all, preheat the motor engine. When it's hot, then you can smear it with grease. This hot grease will melt and destroy all

3. Using Rust Cleaning Cream

You can also use a rust removal cream to remove stubborn rust. Creams with this effective ability to remove rust are usually sold quite cheaply. Even for only 10 thousand rupiah, you can get it for a small size.

Preventing the exhaust from rusting in this way can be done by removing the exhaust part first. Then, clean the stubborn rust on the exhaust by using sandpaper until clean. If you have rinsed with water, then dry it.

This rust cleaning cream is applied after the exhaust is completely dry. Well, after applying the rust cleaning cream, don't forget to flush it with gasoline. After that, put the exhaust back on.

4. Using Toothpaste

Make no mistake if you can also use toothpaste at home to knock out stubborn rust. However, toothpaste as a rust cleaning cream can only be used on exhaust types made of stainless steel. How to use it is quite easy. You just need to apply the toothpaste on the rusty area.

5. Make Use of Baking Soda

For those of you who have a supply of baking soda at home, you can also use it to remove rust on the exhaust. The method is quite easy. Mix the baking soda with the orange juice.

Then, apply a mixture of baking soda and orange juice on the rusty exhaust. Wait for the rust to fade. If so, you can rinse it with a clean cloth.

6. Using Ceramic Cleaning Liquid

Not only toothpaste and baking soda paste, several other household items can also be used to get rid of stubborn rust. For example, ceramic cleaning fluid. How to whiten the exhaust neck in this way is also not difficult.

At first, dab the rusty exhaust area using ceramic cleaning fluid. Then, clean it using a clean cloth. However, make sure that no liquid gets on the engine block. Because, this can cause fatal damage.

Muffler as one part of this motor is prone to corrosion. For that, you have to take good care of it. To remove the rust, you can use the method of removing rust on the exhaust as discussed above.

Post a Comment for " 6 Easy And Cheap Ways To Remove Rust On Exhausts"